Re-Seal Matt Anti-Slip 25Ltr *COLLECTION SPECIAL*

*PLEASE NOTE THIS ITEM IS COLLECTION ONLY FROM OUR WAREHOUSE IN BAMBER BRIDGE*

Re-Seal Matt Anti - Slip 25Ltr supplied in 5ltr tins for ease of use.

Pattern imprinted concrete sealer

Ready to use solvent based sealer specially developed for concrete surfaces.

Preparation

It is recommended that the area to be re-sealed is thoroughly cleaned prior to re-sealing.

Generally pressure washing the area is sufficient.

Remove lichen or moss using Re-Seal Biocidal wash

Remove Oil stains using Re-seal Degreaser

Remove white patches using Re-seal Bloom remover

Instructions For Use

It is recommend that a small test area is coated prior to re-sealing to test the products compatibility with the coating currently in place.

The surface must be completely dry when applying the sealer, if moisture is present the sealer will turn white.

Sealer must be applied at a minimum temperature of 10°c. Ambient temperature should not fall below 5°c during the drying time.

Do not apply when there is a high moisture content present in the air.

Apply using soft broom or short nap roller. Allow 2 - 4hrs drying time before opening to foot traffic and 24hrs for vehicular traffic.