Welcome to Summit Coatings
Online Shop
PAVERSEAL
(WATER BASED)
SATIN FINISH
BLOCK PAVING DRIVEWAY & PATIO SEALER
10ltrs
BENEFITS AND KEY FEATURES
PRODUCT DESCRIPTION
Summit Coatings GemBlock( SATIN) Paving Sealer is manufactured using premium grade acrylic resins.
Manufactured at an ISO 9001 accredited facility to ensure consistent quality, used worldwide by trade professionals
Summit Coatings Gemlock( SATIN) water based sealer penetrates deep into the surface of the blocks protecting them from ingress of water, oil and dirt.
Suitable for – Domestic driveways and commercial car parks.
USES AND SURFACE COMPATIBILITY
Suitable for use on block paving, brickwork and concrete.
Coverage rate
This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 3-4 hours.
Leave 24hrs before applying 2 nd
coat.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
Apply using Brush, Roller, or Sprayer.
Sprayers will provide the best results due to there being less chance of interfering with the sanded joints.
Rollers and brushes are fine for application, be careful when going over joints for best results.
STORAGE PRECAUTIONS
Store away from frost. Secure the lid between uses.
THINNERS
Thinners are not required with this product, use water for cleaning sprayers and brushes.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
Unit 237 Walton Summit Centre, Preston, PR5 8BG, United Kingdom