READY TO USE SOLVENT BASED SEALER ESPECIALLY DEVELOPED
TO CREATE A WET LOOK ON BLOCK PAVING REJUVENATING THE COLOUR
" BLOCK SEAL" sealer will help protect the surface
from oil spills and prevent oil staining.
covers 10 - 15m2 depending on porosity of the block and application method.
Summit Coatings supply a comprehensive range of high quality solvent and water based sealers.
Manufactured at an ISO 9001 accredited facility.
Summit Coatings offer a range of specially formulated acrylic and co-polymer blended
sealers used extensively around the world since 1989.
Based on over 30 years experience we have now developed a range
for re-sealing block paving, pattern imprinted
concrete driveways, patios and paths.
Use BLOCK SEAL
sealer to rejuvenate your block paved driveway, patio or path.
Summit Coatings BLOCK SEAL
imprinted concrete sealer will provide lasting protection
Ready to use supplied in 5ltr UN approved tins to comply with road transport regulations
simply give the can a shake before opening and pour into container suitable for brush or roller application.
Instructions for use
The surface must be completely dry before application, of BLOCK SEAL
applied to wet surfaceswill turn white.
must be applied at a minimum temperature of 10°C. Ambient temperature
should not fall below 5°C during the drying time.
Maximum slab temperature on application should not exceed 25°C.
Do not apply over damp surfaces or when high moisture content in the air.
(Winter months after 3.00pm).
Apply using a roller or soft broom, allow 4 - 5hrs drying time before opening to foot trafficand 72hrs before opening to vehicular traffic.
Health & Safety:
Wear
suitable clothing, gloves and eye protection.
This material contains solvents and should only be used in well ventilated areas.
Face masks must be worn. No naked flames or sparks. No smoking.
Notice:
Summit Coatings Ltd only obligation shall be to replace such quantity of the
product proved to be defective.
User shall determine the suitability in connection therewith.
FREE UK SHIPPING.
( FOR HIGHLANDS AND ISLANDS CONTACT US FOR AQUOTE)
Notice: Summit Coatings only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability in connection therewith. Since the product is used under conditions beyond the control of the manufacturer, these materials must be used strictly in accordance with the manufacturers instructions.
